Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 299)

299 K2 Storage Area Network Installation and Service Manual 26 October 2009
in the following table:
On this page… Do this…
Define server roles
Enter the name for the K2 Media Server, as currently configured on the
machine.
Enter the name or IP address of the Ethernet switch, as currently
configured on the switch, to which the K2 Media Server is connected.
For Level 35 redundant server roles, select
SNFS file system server ,
iSCSI bridge , and Metadata server .
Click Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
If software with Yes in the Required column reports as Not Installed, you
must first install it on the before continuing. After installing the software,
click
Check Software . When all required software reports as Installed,
click Next .