Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 484)

26 October 2009 K2 Storage Area Network Installation and Service Manual 484
Configure Mac Client on K2 SAN
control network.
• Host table information for K2 SAN devices, the control point PC, and the client
device is in the hosts file on the client device.
• The devices of the K2 SAN do not need to be offline, and there is no restart of
devices required.
1. In the K2Config tree view, select the client device.
2. Click the Configure button.
The Client Configuration wizard opens.
NOTE: If your system has a large number of iSCSI clients, you are prompted to
restart the K2 Media Server when you configure clients and cross the following
thresholds: 64 clients; 80 clients; 96 clients.
3. Enter the network name for the client device, as currently configured on the device.
If you have multiple client devices to configure, you should configure your highest
bandwidth devices first, as this ensures load balancing is correct.
4. For Storage Access, leave iSCSI selected.
5. Click Next .
The Xsan Licensing Information page opens.
6. Enter information exactly as received from Apple with your Xsan license. If you
did not receive information for a field on this page, leave the field blank.
For example, if a one-seat license, enter only the Serial number and leave the
Registered To and Organization fields blank.
7. Click Next.
The Software Configuration page opens.