Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 109)

26 October 2009 K2 Storage Area Network Installation and Service Manual 109
Modifying a media (iSCSI) network
4. Click OK to save settings and close.
Modifying a media (iSCSI) network
1. In the Network Configuration | Networks tree view, select the K2 SAN's Site node.
The networks under that node are displayed in the list view.
2. Proceed as follows:
• If the K2 SAN is basic (non-redundant), in the list view, right-click the iSCSI
network and select Details .
• If the K2 SAN is redundant, in the list view, first right-click the primary iSCSI
network and select Details . Then proceed to modify the primary iSCSI network.
After the primary iSCSI network is modified, repeat these steps and modify the
secondary iSCSI network.
The Network Settings dialog box opens.
Setting... For FTP/streaming network
Type Ethernet is required
Usage FileTransfer is required
Redundancy None is required. This is true even on a redundant K2 SAN. (Only the iSCSI
network is redundant on a redundant K2 SAN.)
Name Streaming is recommended
Exclude from Host
Files Unselected is required
Managed Selected is required
Base IP Address The first (lowest) IP address in the range of IP addresses managed by
SiteConfig. Required.
Number of Addresses The number of IP addresses in the range managed by SiteConfig. Required.
Subnet Mask The network's subnet mask. Required.
Gateway IP Address Additional network settings managed by SiteConfig. Allowed.
Unmanaged Unselected is required. Related settings are disabled.
DNS Servers Servers providing DNS for name resolution. Allowed.
Default Interface
Name Suffix _he0 is required