Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 111)

26 October 2009 K2 Storage Area Network Installation and Service Manual 111
About IP configuration of network interfaces on devices
4. Click OK to save settings and close.
About IP configuration of network interfaces on
devices
You can perform IP configuration of network interfaces when working with a
placeholder device prior to discovery. When you add a device and choose a particular
model, the model defines the number, type and usage characteristics of network
interfaces to expect on such a device.
You can view and edit each network interface and set up IP configuration selecting an
appropriate IP from the network to which each interface connects. The process for
editing IP configuration varies, depending on the device's phase.
Setting... For media (iSCSI) network
Type Ethernet is required
Usage StorageNetworking is required
Redundancy None is required for a basic (non-redundant) K2 SAN
Primary is required for a redundant K2 SAN media network A
Secondary is required for a redundant K2 SAN media network B
Name iSCSI (non-Redundant) is recommended for a basic (non-redundant) K2 SAN
iSCSI (Primary Redundant) is recommended for a redundant K2 SAN media
network A
iSCSI (Secondary Redundant) is recommended for a redundant K2 SAN
media network B
Exclude from Host
Files Selected is required
Managed Selected is required
Base IP Address The first (lowest) IP address in the range of IP addresses managed by
SiteConfig. Required.
Number of Addresses The number of IP addresses in the range managed by SiteConfig. Required.
Subnet Mask The network's subnet mask. Required.
Gateway IP Address Not allowed
Unmanaged Unselected is required. Related settings are disabled.
DNS Servers Not allowed
Default Interface
Name Suffix Not allowed