Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 454)

26 October 2009 K2 Storage Area Network Installation and Service Manual 454
Get controller logs
the disk or disks.
Get controller logs
1. In the Storage Utility tree view, select the controller.
2. Click Actions | Get Controller Logs .
3. A message informs you of the location of the logs.
4. Find the log files on the K2 Media Sever at C:\logs.
Unbind RANK
Unbinding reverses the bind process. Unbinding might be needed when reconfiguring
a SAN.
CAUTION: Unbinding destroys all data stored on disk modules.
Refer to “About RANKs and LUNs in Storage Utility” in Chapter 11, Overview of K2
Storage Tools.
The requirements for this procedure are as follows:
• You must access Storage Utility (via the K2 System Configuration application
login) with permissions equivalent to K2 administrator or higher.
• All iSCSI clients and K2 clients in the K2 SAN must be shut down.
To unbind a RANK, do the following:
1. In the tree view, right-click the RANK and select Unbind .
2. When warning messages appear “…destroy all existing media…” and “Are you
sure?”, click OK to continue. The Unbind dialog box opens.
!