Configure macintosh hosts files – Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 475

475
K2 Storage Area Network Installation and Service Manual
26 October 2009
Chapter 13 K2 FCP Connect access for Final Cut Pro systems
2. Set Ethernet 1 to configure manually (static IP).
3. Configure IP address, subnet mask, and other settings as required for the K2 SAN
control network.
Configure Macintosh hosts files
On each Macintosh Final Cut Pro system, enter K2 SAN host table information as
follows:
1. Open Applications\Grass Valley\EditHosts
Terminal opens.
2. Enter the Macintosh system's administrator password.
The hosts file opens in a text editor.
This manual is related to the following products: