Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 339)

339 K2 Storage Area Network Installation and Service Manual 26 October 2009
NOTE: Multiple NH servers on a K2 SAN must be of the same type, either all NH1
or all NH1-10GE.
3. If you got a “The V: will not be available until this device is rebooted…” message
File System Server
Configuration
This page checks on the
configuration of the K2
Media Server in one of its
main roles as a file system
server. The K2 Media Server
also functions as a file
system client, which is also
checked from this page.
It is not necessary to bind
RANKs or create a file
system, since those tasks
were completed when you
configured the first K2
Media Server.
Click Check . Confirm a “… file copied…” message. When the wizard
reports that the configuration check is successful, click Next . and Yes to
confirm copying the file system configuration file to the server.
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.
FTP Server Configuration
This page appears only if the
server has the role of FTP
server.
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…