Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 69)

26 October 2009 K2 Storage Area Network Installation and Service Manual 69
Cabling the LS K2 Media Server
Cabling the LS K2 Media Server
One LS K2 Media Server – Dell 2950 PowerEdge – non-redundant
One LS K2 Media Server – Dell R710 PowerEdge – non-redundant
Connect the four iSCSI interface ports to media ports on the GigE switch.
Connect the motherboard GigE port 1 and GigE port 2 to control ports on the
GigE switch.
Connect the Fibre Channel port to the RAID storage device.
PCI 1
PCI 2
PCI 3
Gb 1 Gb 2
To media (iSCSI)
ports on GigE switch Fibre Channel
to RAID controller
To control port
on GigE switch FTP: To control port
on GigE switch
To media (iSCSI)
ports on GigE switch Fibre Channel
to RAID controller
To control port
on GigE switch FTP: To control port
on GigE switch