Configuring the nh server - part 1 – Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 328
26 October 2009
K2 Storage Area Network Installation and Service Manual
328
Configuring the NH server - Part 1
described in the following table:
On this page…
Do this…
Define server roles
Enter the name for the K2 Media Server, as currently configured on the
machine.
For Nearline server roles, selections are disabled. Leave
SNFS file
system server
,
FTP server
, and
NAS server
selected.
The wizard does not allow you to select Media Database Server. There
is no Media Database Server in a nearline system.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
MPIO software is
required on K2 Media
Servers in the NL10R
system and in other
nearline redundant
systems.
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. After
installing the software, click
Check Software
. When all required
software reports as Installed, click
Next
.