Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 67)

26 October 2009 K2 Storage Area Network Installation and Service Manual 67
Cabling the GS K2 Media Server
Cabling the GS K2 Media Server
One GS K2 Media Server – Dell 1950 PowerEdge – non-redundant
One GS K2 Media Server – Dell R610 PowerEdge – non-redundant
Connect the two iSCSI interface ports to media ports on the GigE switch.
Connect the motherboard GigE port 1 and GigE port 2 to control ports on the
GigE switch.
Connect the Fibre Channel port to the RAID storage device.
Two GS K2 Media Servers – Dell 1950 PowerEdge – redundant
1 2
Gb 2 Gb 1
To media (iSCSI)
ports on GigE switch Fibre Channel
to RAID controller
To control port
on GigE switch FTP: To control port
on GigE switch
To media (iSCSI)
ports on GigE switch Fibre Channel
to RAID controller
To control port
on GigE switch FTP: To control port
on GigE switch
1 2
Gb 2 Gb 1
1 2
Gb 2 Gb 1
A
B
To media (iSCSI)
ports on GigE switch A Fibre Channel
to RAID controller 0
To media (iSCSI)
ports on GigE switch B Fibre Channel
to RAID controller 1
To control port
on GigE switch A FTP: To control port
on GigE switch A
To control port
on GigE switch B FTP: To control port
on GigE switch B
Heartbeat
cable
(serial)