Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 329)

329 K2 Storage Area Network Installation and Service Manual 26 October 2009
3. Continue with the next procedure to use Storage Utility to configure the file
system.
Leave the Configure K2 Server wizard open while you are using Storage Utility.
When you are done with Storage Utility, you continue with the wizard.
Configuring RAID
Use Storage Utility to complete the configuration of the Nearline 10 RAID chassis, as
explained in the following topics:
Configuring RAID network and SNMP settings
Use the Storage Utility to configure the following settings for the Nearline RAID
controller or controllers:
Network Configuration
This page displays the
control network Ethernet
port, and allows you to
configure the FTP/
Streaming network Ethernet
port.
The top port is the port over which the K2 System Configuration
application is communicating. If correctly configured, it is already
assigned the control network IP address, as displayed on this page.
Click Next .
File System Server
Configuration
Click Launch Storage Manager . Storage Utility opens.
On this page… Do this…