Storage utility – Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 388

26 October 2009
K2 Storage Area Network Installation and Service Manual
388
Storage Utility
NOTE: Do not click Stop or Start unless you intend to manually control the current
primary/redundant roles. Using these buttons can trigger an automatic system
recovery (failover) event.
To launch Server Control Panel, in the K2 System Configuration application, click the
Server Control Panel
button.
On the local K2 Media Server, you must log in with administrator-level privileges in
order to use Server Control Panel.
Refer to procedures in
Chapter 12,
Administering and maintaining the K2 SAN to use
Server Control Panel for maintenance, service, and other tasks.
Storage Utility
There are two versions of Storage Utility:
• Storage Utility for the K2 SAN
• Storage Utility for stand-alone K2 systems
This section explains Storage Utility for the K2 SAN. Refer to the K2 System Guide
to learn about Storage Utility for stand-alone K2 clients.
NOTE: For shared storage, run Storage Utility only via the K2 System
Configuration application.
If your K2 SAN does not have
redundant servers, only the left
panel (one server) appears.
If your K2 SAN has redundant servers, both
panels (two servers) appear.