Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 268)

26 October 2009 K2 Storage Area Network Installation and Service Manual 268
Configuring the redundant server B
Network Configuration
This page displays the
control network Ethernet
port, and allows you to
configure the FTP/
Streaming network Ethernet
port.
NOTE: This page
does not configure
the iSCSI interface
(media network)
ports.
For systems with an optional
NH server, this server does
not take the role of FTP
server, so configuring the
second port here for the FTP/
streaming network is not
required.
The top port is the port over which the K2 System Configuration
application is communicating with the K2 Media Server. If correctly
configured, it is already assigned the control network IP address, as
displayed on this page.
If the server has the role of FTP server, if the other port is not already
configured correctly, select the other port and click
Modify . A network
configuration dialog box opens. Enter the FTP/Streaming IP address and
the subnet mask and click
Apply .
Click Next .
File System Server
Configuration
This page checks on the
configuration of the K2
Media Server in one of its
main roles as a file system
server. The K2 Media Server
also functions as a file
system client, which is also
checked from this page.
It is not necessary to bind
RANKs or create a file
system, since this task was
completed when you
configured the previous K2
Media Server.
Click Next .
Confirm messages about copying the file system configuration file to the
other server.
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.
On this page… Do this…