Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 351)

351 K2 Storage Area Network Installation and Service Manual 26 October 2009
Chapter 8 Configuring K2 clients on the K2 SAN
File System Client
Configuration
This page connects the K2
client as a media file system
client to the K2 Media
Server taking the role of
media file system server. If
there are redundant K2
Media Servers, both are
listed on this page as file
system servers.
Verify that the K2 client is connecting to the correct K2 Media Server or
Servers, as follows:
• For Levels 2, 10, 20, and 30, the client connects to the only server.
• For Levels 2R, 10R, 20R, and 30R, the client connects to server
A as file system server 1 and server B as file system server 2.
• For Level 3 and 35, the client connects to server 1.
• For Level 3R and 35R, the client connects to server 1A as file
system server 1 and server 1B as file system server 2.
Click Check . When the wizard reports that the configuration check is
successful, click Next .
On this page… Do this…