Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 317)

317 K2 Storage Area Network Installation and Service Manual 26 October 2009
Configuring the redundant server 2B
You must wait for server 2A to restart before continuing.
For Level 35 redundant, you next configure server 2B. It is the redundant partner to
server 2A.
iSCSI Bridge Server
Configuration
This page manages the
components that bridge
between iSCSI (the GigE
media network) and the
RAID storage. You
configure network settings
on the iSCSI adapter and the
page validates that the media
RANKs are visible as iSCSI
targets.
Select Primary .
Select an iSCSI adapter and click Modify . A network configuration
dialog box opens. Verify or enter the media network IP address and
subnet mask and click
Apply . Do the same for the other iSCSI adapter.
To verify drives, click Check then View Target Drives . You should see
all your media drives listed.
Click
Next .
FTP Server Configuration
This page appears only if the
server has the role of FTP
server.
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page… Do this…