Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 65)

26 October 2009 K2 Storage Area Network Installation and Service Manual 65
Cabling the Level 10 K2 Media Server
One GS K2 Media Server – Dell R610 PowerEdge – non-redundant
Connect the iSCSI interface port to a media port on the GigE switch. Connect
the motherboard GigE port 1 and GigE port 2 to control ports on the GigE
switch.
Connect the Fibre Channel port to the RAID storage device.
Two GS K2 Media Servers – Dell 1950 PowerEdge – redundant
Two GS K2 Media Servers – Dell R610 PowerEdge – redundant
To media (iSCSI)
port on GigE switch Fibre Channel
to RAID controller
To control port
on GigE switch FTP: To control port
on GigE switch
1 2
Gb 2 Gb 1
1 2
Gb 2 Gb 1
A
B
To media (iSCSI)
port on GigE switch A Fibre Channel
to RAID controller 0
To media (iSCSI)
port on GigE switch B Fibre Channel
to RAID controller 1
To control port
on GigE switch A FTP: To control port
on GigE switch A
To control port
on GigE switch B FTP: To control port
on GigE switch B
Heartbeat
cable
(serial)
A
B
To media (iSCSI)
port on GigE switch A Fibre Channel
to RAID controller 0
To media (iSCSI)
port on GigE switch B Fibre Channel
to RAID controller 1
To control port
on GigE switch A FTP: To control port
on GigE switch A
To control port
on GigE switch B FTP: To control port
on GigE switch B
Heartbeat
cable
(serial)