Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 55)

26 October 2009 K2 Storage Area Network Installation and Service Manual 55
Software update checklist
Software update checklist
SAN configuration checklist
❑ Discover devices Chapter 5, topic “Discovering devices
with SiteConfig” Make sure the write filter is
disabled (device is unlocked) on
K2 Summit Production Clients.
❑ Assign placeholder devices to discovered
devices Chapter 5, topic “Assigning
discovered devices” —
❑ Configure IP settings of network
interfaces on discovered devices Chapter 5, topics “Modifying K2
client managed network interfaces”,
“Modifying K2 Media Server
managed network interfaces” —
❑ Configure names Chapter 5, topic “Making the host
name the same as the device name” —
❑ Validate networks Chapter 5, topic “Pinging devices
from the control point PC” —
❑ Distribute host table information Chapter 5, topic “Generating host
tables for devices” —
❑ Next: Software update checklist
Task Instructions Comments
❑ Create deployment groups Chapter 6, Managing K2 software,
topic “Configuring deployment
groups” —
❑ Place software on control point PC Chapter 6, topic “Adding a software
package to a deployment group” —
❑ Check software on devices Chapter 6, topic “Checking all
currently installed software on
devices” —
❑ Upgrade/install software to devices from
control point PC Chapter 6, topic “About deploying
software for the K2 SAN” Refer to K2 Release Notes. Make
sure the write filter is disabled
(device is unlocked) on K2
Summit Production Clients.
❑ Next: SAN configuration checklist
Task Instructions Comments
❑ Import SiteConfig system description
into K2Config Chapter 7, Configuring the K2 SAN,
topic “Importing a SiteConfig system
description” —
❑ Configure SAN in K2Config Use the appropriate instructions for
your K2 SAN level from Chapter 7. Make sure the write filter is
disabled (device is unlocked) on
K2 Summit Production Clients.
❑ K2 SAN installation complete
Task Instructions Comments