Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 153)

153 K2 Storage Area Network Installation and Service Manual 26 October 2009
Chapter 7 Configuring the K2 SAN
Importing a SiteConfig system description
You can import a SiteConfig system description that contains a K2 SAN into the K2
System Configuration (K2Config) application. You should do this only after the K2
SAN is fully complete and implemented in SiteConfig, as changes are not
automatically synchronized between SiteConfig and K2Config after the import.
When you import a SiteConfig system description, K2Config identifies your SAN
devices, defines the SAN, and displays the unconfigured SAN in the tree view.
Therefore you do not need to define the K2 SAN in K2Config. You can skip this task
and instead begin your work in K2Config by configuring the first K2 Media Server.
1. In the K2 System Configuration application, click File | Import SiteConfig .
2. Browse to and select the system configuration file.
A K2 System Information dialog box opens.
3. In the drop-down list, select the K2 SAN level for the K2 SAN that you are
importing.
4. If a redundant K2 SAN, select “… failover capabilities …”
5. Click OK .
6. The SAN appears in the K2 System Configuration application.