Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 162)

26 October 2009 K2 Storage Area Network Installation and Service Manual 162
Configuring RAID
their placement in the hierarchy of the tree view. In the following illustration, disk
numbers are represented by “XX”. Refer to
“Identifying disks” on page 451 for an
explanation of how disks are actually numbered in Storage Utility.
2. To bind unbound disks for media storage, do the following:
a. Right-click the Unbound node for a controller, then select Bind in the context
menu. (If the RAID chassis has two controllers, both controllers are represented
by the single “Controller” node)
The Bind dialog box opens showing all unbound disks for the controller listed
in the Available Disk list.