On the k2 media server (fsm), On the control point pc, On selected macintosh computer(s) – Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 472: Final tasks
26 October 2009
K2 Storage Area Network Installation and Service Manual
472
Final Cut Pro on K2 SAN quick start installation checklist
On the K2 Media Server (FSM)
On the Control Point PC
On selected Macintosh computer(s)
Final tasks
Task
Comment
Request a K2 FCP Connect license from
Grass Valley for each K2 Media Server with
role of media file system server (FSM) on
the SAN.
Make the license request early to ensure that
the license file is received and installed
before configuring the Mac Client in
K2Config.
When the license XML is received, install it
on the K2 Media Server (FSM).
—
Configure hosts files on SAN devices.
Enter Macintosh devices in hosts files.
Enable Access Control Lists, if desired.
This is optional. If you do this task, you must
also configure Active Directory Domain on
the Macintosh systems.
Task
Comment
Configure hosts file.
Enter Macintosh devices in hosts file.
In K2Config, add and configure Mac
Client(s) onto K2 SAN.
The K2 FCP Connect license must be
installed on K2 Media Server(s). K2Config
can not proceed if the license is not installed.
Task
Comment
Test access to K2 SAN storage.
From the Macintosh system, create, modify,
delete a text file.
Verify bandwidth of SAN connection
—
Task
Comment
If used, verify Access Control Lists.
—
If desired, configure K2 SAN HotBin to
receive finished Final Cut Pro files.
Refer to the K2 System Guide.