Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 184)

26 October 2009 K2 Storage Area Network Installation and Service Manual 184
Configuring server A - Part 2
iSCSI Bridge Server
Configuration
This page manages the
components that bridge
between iSCSI (the GigE
media network) and the
Fibre Channel connection to
the RAID storage. You
configure network settings
on the iSCSI adapters and
the page validates that the
Fibre Channel adapter is in
place and that the media
RANKs are visible as iSCSI
targets.
Select Primary .
Select an iSCSI adapter and click Modify . A network configuration
dialog box opens. Verify or enter the media network IP address and the
subnet mask and click
Apply .
Do the same for the other iSCSI adapter. You must verify or configure
the second iSCSI adapter, even though it is not used on a L10R system.
Click
Check . The Validation Report opens.
Confirm that the iSCSI configuration is successful. Close the Validation
Report and then click
Next .
On this page… Do this…