Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 121)

26 October 2009 K2 Storage Area Network Installation and Service Manual 121
Modifying K2 client managed network interfaces
read a tooltip with information about the problem.
NOTE: For the K2 Summit Production Client, make sure that the device is
unlocked in SiteConfig before proceeding. This disables the write filter.
4. In the Interfaces list view, right-click the interface you are configuring and select
Edit.
The Managed Network Interface Details dialog box opens.
5. Identify the interface on the discovered device that you are configuring.
• Identify Ethernet LAN adapters by their "Description" name. This is the
Windows connection name. SiteConfig reads this name from the device and
displays it at the top of this dialog box. This is the most accurate way to identify
the network adapter on the discovered device that you are configuring.
6. Configure naming settings as follows:
Setting... For network interface Control Team
Interface Name The device host name. Required.
Set To Default Not recommended
DNS Suffix Allowed, if applicable to the network. The DNS suffix is added to the
interface name.