Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 321)

321 K2 Storage Area Network Installation and Service Manual 26 October 2009
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a Level 35R K2 SAN, as described in the
following table. Some screens require no input from you, as they are based on the
configurations already completed on a previously configured K2 Media Server.
On this page… Do this…
Define server roles
Enter the name for the K2 Media Server. This should be the current
network name of the machine.
Select FTP server and NAS server.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. After
installing the software, click
Check Software . When all required
software reports as Installed, click Next .