Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 135)

26 October 2009 K2 Storage Area Network Installation and Service Manual 135
Configuring K2 software deployment
Configuring K2 software deployment
Take the following into consideration when using SiteConfig to deploy K2 SAN
software.
• You typically configure one deployment group for K2 clients and one deployment
group for K2 Media Servers. This allows you to target and sequence software
deployment tasks to the different types of devices.
• You typically upgrade K2 Media Servers first, then K2 Media Clients.
• Always follow detailed steps in K2 Release Notes for the version of software to
which you are upgrading.
Use the following topics to manage software deployment on a K2 SAN.
Configuring deployment groups
Prerequisites for this procedure are as follows:
• The device is assigned in the SiteConfig system description and network
connectivity is present.
1. In the Software Deployment | Deployment Groups tree view, right-click the top node
and select Add Deployment Group .
A deployment group appears in the tree view.
2. Right-click the deployment group, select Rename , and enter a name for the
deployment group.
3. Right-click the deployment group and select Add Target Device .
The Add Target Device(s) wizard opens.