Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 38
38
K2 Storage Area Network Installation and Service Manual
26 October 2009
Chapter 1 Product Description
The L10 RAID chassis has redundant RAID controllers to support the Fibre Channel
connections from the K2 Media Servers. The L10 RAID chassis is also connected to
the GigE control network, which is required for SNMP (NetCentral) monitoring.
On the L10 RAID chassis there are two RAID 1 RANKs (also know as LUNs) for
media file system metadata files and journal files. The remainder of the RAID storage
is RAID 5 or RAID 6 for media.
The K2 configuration control point PC is connected to the GigE control network. The
K2 System Configuration application runs on this PC for configuring the SAN.
FTP/streaming traffic accesses the K2 SAN via the FTP GigE port on K2 Media
Servers. FTP/streaming traffic does not go to K2 clients.