Grass Valley K2 Summit Storage Area Network v.7.1 User Manual
Page 189
189
K2 Storage Area Network Installation and Service Manual
26 October 2009
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click
Check
and verify that the V: drive is shared. This is required for NAS
server functionality.
Next, configure K2 clients and/or other iSCSI clients on the K2 SAN.
FTP Server Configuration
This page appears only if the
server has the role of FTP
server.
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard
Click
Finish
. The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished.
On this page…
Do this…