beautypg.com

Chapter 4. updating firmware, 1 updating firmware via internet – Comtech EF Data CDM-625 User Manual

Page 91

background image

4–1

Chapter 4. UPDATING FIRMWARE

4.1 Updating Firmware via Internet

BE SURE TO OPERATE THE CDM-625 WITH ITS LATEST AVAILABLE FIRMWARE.

The CDM-625 Advanced Satellite Modem is factory-shipped with its latest version of operating

firmware. If a firmware update is needed, once Ethernet connectivity has been established with

the unit, you can download the update archive file from the Comtech EF Data Web site

(

www.comtechefdata.com

), or obtain it through e-mail from Comtech EF Data Product Support.

You can perform the CDM-625 Firmware Update without opening the unit as follows:

• Connect the rear panel serial “Remote Control” port or “10/100 Ethernet” port to a serial or

10/100 BaseT Ethernet port of the user PC.

• Download the firmware update archive file via the Internet to the user PC.

• Use File Transfer Protocol (FTP) to transfer the extracted firmware update files from the

user PC to the UNIT.

4.2 About Firmware Files, Naming, Versions, and Archive Formats

Comtech EF Data’s Web site catalogues its firmware update

files by product type (e.g., modem, converter, etc.) and

specific model/optional configuration. The hyperlinks appear

as per the example to the right. This example depicts the

F0020534*_V### base modem bulk firmware download

hyperlink (where ‘###’ indicates the firmware version

number, and ‘*’ denotes the revision letter of that version).

In addition to this base modem bulk firmware archive file, downloads are available for the

UNIT’s optional IP Packet Processor Module, available with or without AES Encryption. This

module requires separate firmware update.