Comtech EF Data CDM-625 - Manual (Page 486)

CDM-625 Advanced Satellite Modem Revision 15
Appendix D MN-CDM625
D–22
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to
Query
Rx Data Rate RDR= 9 bytes Command or Query (Query only in IP-ACM).
Rx Data Rate, in kbps, between 18 kbps to 25 Mbps.
Resolution=1 bps
Example: RDR=02047.999.
Additional auxiliary G.703 sub-rates are available, selected using:
00512.AUX
01024.AUX
02048.AUX
If set for QDI (Quad D&I), RDR is query only.
The connectors used for the Aux rates are IDI/DDO.
These Aux rates are not available with D&I or IDR.
RDR=
RDR?
RDR*
RDR#
RDR? RDR=xxxxx.xxx
(see Description of
Arguments)
Rx Symbol
Rate
RSR= 9 bytes,
numeric
Query only (Command or Query in IP-ACM).
Allows remote access to the Rx Symbol Rate in the form ddddd.ddd
Note: Symbol Rate ranges in IP-ACM = 37 ksym/sec to 4100 ksym/sec
RSR=
RSR?
RSR*
RSR#
RSR? RSR=ddddd.ddd
(see Description of
Arguments)
Rx
Frequency
RFQ= 9 bytes
Exception –
600 Emulation:
8 bytes
Command or Query.
Frequency ranges:
50 MHz to 180 MHz, and
950 MHz to 1950 MHz (L-Band – FAST option)
950 MHz to 2150 MHz (Top card hardware Revision 2)
Resolution=100Hz.
Note: The CDM-625 supports 70,140 MHz bands and L-Band.
Example: RFQ=0950.9872
RFQ=
RFQ?
RFQ*
RFQ#
RFQ? RFQ=xxxx.xxxx
(see Description of
Arguments)
Exception –
600 Emulation:
RFQ=xxx.xxxx
Rx Sub-Mux
on/off
RMX= 1 byte, 0 or 1 Command or Query.
Rx Sub-Mux in the form x, where:
0=Off
1=On
RMX?
RMX=
RMX*
RMX#
RMX? RMX=x
(see Description of
Arguments)
Rx Sub-Mux
Ratio
RMR= 2 bytes,
numeric
Command or Query.
Rx Sub-Mux Ratio (IP/Synchronous Interface) in the form xx, where:
RMR?
RMR=
RMR*
RMR#
RMR? RMR=xx
(see Description of
Arguments)
00=1/9
01=1/8
02=1/7
03=1/6
04=1/5
05=1/4
06=2/7
07=1/3
08=2/5
09=3/7
10=1/2
11=3/5
12=2/3
13=3/4
14=4/5
15=1/1
16=5/4
17=4/3
18=3/2
19=5/3
20=2/1
21=7/3
22=5/2
23=3/1
24=7/2
25=4/1
26=5/1
27=6/1
28=7/1
29=8/1
30=9/1
31=1/59 32=1/39 33=1/19
Example: RMR=01 (Selects ratio 1/8)