Comtech EF Data CDM-625 - Manual (Page 181)

CDM-625 Advanced Satellite Modem Revision 15
Front Panel Operation MN-CDM625
5–81
5.2.6 SELECT: Utility Menus
Utilities: Set-RTC Display-Bright CarrID
LED Redundancy Circuit-ID Firmware Em
Use the ◄ ► arrow keys to select Set-RTC, Display-Bright, CarrID, LED, Redundancy, Circuit-ID,
Firmware, or Em, and then press ENTER .
5.2.6.1 Utilities: Set-RTC
Edit Real-Time Clock:
Time: 12:01:02 Date:26/10/06 ()
To edit the time and date settings of the Real-Time Clock, use the ◄ ► arrow keys to select a
digit to edit, and then use the ▲▼ arrow keys to change that digit. Press ENTER when done.
The date is shown in DAY-MONTH-YEAR format in accordance with European convention.
5.2.6.2 Utilities: Display-Bright
Edit Display Brightness:
100% ()
To edit the brightness of the VFD (Vacuum Fluorescent Display), use the ▲▼ arrow keys to
select a suitable brightness level. The selectable values are 25%, 50%, 75% or 100%. Press
ENTER when done.
5.2.6.3 Utilities: CarrID
Chapter 19. CARRIER ID (M ETA C ARRIER ®)
Carrier ID: Disabled (Disabled, Enabled)
()
Use the ▲▼ arrow keys to select the Carrier ID (MetaCarrier) function as Enabled or Disabled,
and then press ENTER.
WHEN ENABLING CARRIER ID OPERATION, BE SURE TO CREATE A 24-CHARACTER
(MAX) CARRIER ID CUSTOM MESSAGE USING THE UTILITIES: CIRCUIT ID MENU (SEE
SECT. 5.2.6.6 Utilities: Circuit ID).