Comtech EF Data CDM-625 - Manual (Page 216)

CDM-625 Advanced Satellite Modem Revision 15
Ethernet-based Remote Product Management MN-CDM625
6–24
6.5.4.3 Configuration Pages
Use the ‘Configuration’ pages to configure all operating parameters for the CDM-625, including
its ODUs (Outdoor Units) when connected. Click the Modem, LAN, Routing, WAN, Overhead,
Utilities, D&I, BUC, or LNB tab to continue.
6.5.4.3.1 Configuration | Modem
Chapter 5. FRONT PANEL OPERATION
Use the ‘Configuration | Modem’ page to configure these modem operating parameters:
• Tx / Rx Interfaces and Framing* • Carrier-in-Carrier (CnC) Parameters
• Tx / Rx Operating Parameters • ACM Parameters
*The Tx / Rx Interface Types and Framing Modes have higher priority than other
parameters, and should be configured before setting other parameters.
Figure 6-13. Configuration | Modem page
Click [Submit] to save these settings.