Comtech EF Data CDM-625 User Manual
Page 461
CDM-625 Advanced Satellite Modem
Revision 15
Appendix C
MN-CDM625
C–3
Step Task
4
Enter the FAST access code(s):
a) Press [CLEAR] to return to the SELECT: FAST Options Set Registers menu.
b) Use the arrow keys (▲▼◄ ►) to carefully enter each register-specific 20-character FAST
access code.
c) Press [ENTER].
For Firmware Ver. 1.5.1 or earlier, enter the FAST access code for option
register(s) #1, #2 and/or #3 as required. For Firmware Ver. 1.5.2 and later, all
three FAST access codes must be entered in sequence
The modem responds with “Configured Successfully” if the FAST upgrade is accepted; the modem
then resets to its newly-incorporated default configuration.
in order for the purchased
option upgrades to be properly activated.
However, if an invalid code is entered, the following message displays:
Failed to configure. Re-enter code.
88888888888888888888 then [ENTER]()
Repeat the FAST access code entry procedure. Should the code entry error persist, contact Comtech EF
Data Product Support for further assistance.