Comtech EF Data CDM-625 - Manual (Page 661)

CDM-625 Advanced Satellite Modem Revision 15
Appendix F MN-CDM625
F–43
F.4.2.4.1 ODU | Enable
Use this page to enable or disable communications with CSAT-5060 or KST-2000A/B ODUs for
70/140 MHz operation, or LPOD BUCs for L-Band operation (see Sect. F.4.2.1 Configuration |
BUC (Block Up Converter)).
Figure F-8. ODU | Enable page
ODU Comms
Use the drop-down list to select ODU operation as Disabled or Enabled, and then click [Submit].
If you encounter a communications issue – e.g., an ODU is either physically not present or the
ODU Comms cable is not connected to the CDM-625 – the following error page displays after
clicking [Submit]:
Take steps to troubleshoot the ODU setup before attempting to enable ODU operations from
this page. See the pertinent ODU Installation and Operation Manual for further information.