Comtech EF Data CDM-625 - Manual (Page 543)

CDM-625 Advanced Satellite Modem Revision 15
Appendix E MN-CDM625
E–15
E.3.2.3 Home > Administration > Firmware (Base Modem) or (Packet
Processor)
Open the Base Modem and Packet Processor Firmware pages from the Administration submenu.
Use these pages to view the current firmware information, or to select the alternate firmware
image to be loaded at startup or reboot. Both pages contain the following option:
Hot
Key Dialog Window
Option Entry
A Boot From Use the ↑↓ arrow keys to set load as Image1 or Image2
Press the hot key to open the dialog window. Otherwise, press [ESC] to return to the
Administration submenu.
You must reboot the unit in order for the new firmware image load selection to take
effect.