Comtech EF Data CDM-625 - Manual (Page 197)

CDM-625 Advanced Satellite Modem Revision 15
Ethernet-based Remote Product Management MN-CDM625
6–5
6.4 Telnet Interface
Comtech EF Data provides a Telnet interface for the purpose of equipment monitor and control
(M&C) using either the standard remote control protocol or, when the optional IP Packet
Processor is installed and enabled, the Telnet Command Line Interface (CLI).
6.4.1 Using the Telnet Interface for Remote Control Operation
Appendix D. REMOTE CONTROL
The Telnet interface requires login at the Administrator and Read/Write User Access Levels. An
example of the login process is shown here:
Once logged into the Telnet interface as the Administrator, the standard Remote Control
interface defined in Appendix D. REMOTE CONTROL is accessible, as shown here:
6.4.1.1 Using HyperTerminal for Telnet Remote Control Operation
There is a disadvantage when using Windows Command-line as a Telnet client with the standard
Remote Control protocol. Since Command-line cannot translate a ‘\r’ (i.e., carriage return or
“CR”) to a ‘\r\n’ (i.e., CR+line feed “LF”) for the messages coming from Telnet Server, any multi-