Comtech EF Data CDM-625 - Manual (Page 189)

CDM-625 Advanced Satellite Modem Revision 15
Front Panel Operation MN-CDM625
5–89
verify the order and provide an invoice and instructions, including a register-specific 20-digit
FAST Access Code.
Enter the FAST Access Code that you have obtained from Comtech EF Data carefully using the
front panel keypad or, alternately, the CDM-625 Web Server (HTTP) Interface:
• From the unit front panel – First, use the ◄ ► arrow keys to select a digit to edit, and then
use the ▲▼ arrow keys to change that digit. Compose the code carefully, and then press
ENTER only when you are ready to execute the upgrade.
For Firmware Ver. 1.5.1 or earlier, enter the FAST access code for option
register(s) #1, #2 and/or #3 as required. For Firmware Ver. 1.5.2 and later, all
three FAST access codes must be entered in sequence in order for the
purchased option upgrades to be properly activated.
The modem responds with “ Configured Successfully ” upon completion of the
FAST upgrade; the modem then resets to its newly incorporated default configuration.
However, if you enter an invalid code, the modem rejects the entry and the unit prompts
you to re-enter the code as follows:
Failed to configure. Re-enter code.
88888888888888888888 then [ENTER] ()
Repeat the FAST access code entry procedure. Should the code entry error persist, contact
Comtech EF Data Customer Support for further assistance.
• From the CDM-625 Web Server Interface – See Sect. 6.5.4.2.5 Admin | FAST.
5.2.8.2 FAST: Demo-Mode
FAST Options Demo Mode: Off (Off,On) ()
1209600 seconds remaining.
FAST Options Demo Mode allows access to ALL CDM-625 FAST options for 2592000 seconds (30
calendar days). On the top line, use the ▲▼ arrow keys to select Demo Mode as Off or On, and
then press ENTER. The bottom line displays the time remaining – the time format is in seconds.
Note the following:
• The time count decrements only when Demo Mode is turned On. Demo Mode may be
turned on and off an unlimited number of times until the full 30 calendar days have expired.
Upon expiration of the Demo period, the following message displays:
FAST Options Demo Mode: Expired ()
0000000 seconds remaining.