Comtech EF Data CDM-625 - Manual (Page 548)

CDM-625 Advanced Satellite Modem Revision 15
Appendix E MN-CDM625
E–20
• Next, open the Save Modem
Configuration window (Home
> [A] Administration > [G]
Save Modem Configuration).
Note the Configuration slots
listed in the window, and
then press [A] Save to Slot.
The nested dialog window
opens:
• Then, enter 0 through 9, and then press [ENTER] to accept the selection.
• Finally, press [F8] to save (store) the configuration. Wait while the configuration is
stored into memory.
Once a modem configuration is stored into the designated slot, the time and date are recorded,
and this information appears on the configuration slot line.
To load (recall) a configuration setting:
• First, open the Load Modem
Configuration window (Home
> [A] Administration > [H]
Load Modem Configuration).
Note the saved configuration
slots listed in the window,
and then press [A] Load from
Slot. The nested dialog
window opens:
• Then, enter 0 through 9, and press [ENTER] to accept the selection.
• Finally, press [F8] to load (recall) the configuration. Wait while the configuration is
loaded from memory.