Comtech EF Data CDM-625 - Manual (Page 151)

CDM-625 Advanced Satellite Modem Revision 15
Front Panel Operation MN-CDM625
5–51
CONFIG: IP  Addresses  Gateway
Ethernet IP Gateway:
192.168.001.002 ()
To edit the IP Gateway Address for the Ethernet M&C port for this unit, use the ◄ ► arrow keys
to select a digit to edit, and then use the ▲▼ arrow keys to change that digit. Press ENTER
when done.
CONFIG: IP  Addresses  Address/Range
Ethernet IP Address/Range:
192.168.001.002/24 ()
To configure the IP Address for the Ethernet M&C port for this unit, use the ◄ ► arrow keys to
select a digit to edit, and then the ▲▼ arrow keys to change that digit. Press ENTER when done.
5.2.1.13.2 CONFIG: IP  SNMP
SNMP:
Communities Traps ()
Use the ◄ ► arrow keys to select Communities or Traps, and then press ENTER.
CONFIG: IP  SNMP  Communities
SNMP Communities:
Read Write ()
Use the ◄ ► arrow keys to select Read or Write, and then press ENTER.
CONFIG: IP  SNMP  Communities  Read
SNMP Read Community:
Public (20 chars) ()
To edit the SNMP Read Community string, use the ◄ ► arrow keys to select a character to edit,
and then use the ▲▼ arrow keys to edit that character.
Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash (ASCII code 92)
and ~ (ASCII code 126).