Comtech EF Data CDM-625 - Manual (Page 418)

CDM-625 Advanced Satellite Modem Revision 15
IP Packet Processor Option MN-CDM625
18–6
18.3.2.1 SNMP Interface
Sect. 6.3 SNMP Interface (Chapter 6. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT)
The Simple Network Management Protocol (SNMP) is an Internet-standard protocol for managing
devices on IP networks. An SNMP-managed network consists of three key components:
• The managed device – This includes the CDM-625 Advanced Satellite Modem.
• The SNMP Agent – The software that runs on the CDM-625. The CDM-625 SNMP Agent
supports both SNMPv1 and SNMPv2c.
• The user-supplied Network Management System (NMS) – The software that runs on the
manager.
18.3.2.2 Telnet Interface
• Sect. 6.4 Telnet Interface (Chapter 6. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT)
• Appendix D. REMOTE CONTROL
• Appendix E. TELNET COMMAND LINE INTERFACE (CLI) OPERATION
Comtech EF Data provides a Telnet interface for the purpose of equipment monitor and control
(M&C) using either the standard remote control protocol or, when the optional IP Packet
Processor is installed and enabled, the Telnet Command Line Interface (CLI).