Comtech EF Data CDM-625 - Manual (Page 538)

CDM-625 Advanced Satellite Modem Revision 15
Appendix E MN-CDM625
E–10
E.3 Command Line Interface Pages
E.3.1 Home (Main) Menu
The Home Menu serves as the CLI’s primary navigation page. All selections made on this page
take you to the submenus listed in this table. Press a hot key to access a submenu from this top-
level navigation page.
Hot
Key Description
Function Sect.
A Administration Access administrative configuration submenu E.3.2
B Modem Access modem configuration submenu E.3.3
C Network Access network configuration submenu E.3.4
D WAN Access WAN configuration submenu E.3.5
E Outdoor Unit (ODU)
Access ODU comms, CSAT-5060 configuration submenus (summary
only)
E.3.6
F Redundancy Access 1:1 or 1:N redundancy configuration submenu E.3.7
G General Information
Enter alphanumeric Circuit ID; view read-only CDM-625 operations
information screens
E.3.8
H Logs
Access Base Modem and Packet Processor stored events and
statistics logs, alarms control submenus
E.3.9
I Statistics Access CDM-625 operational statistics submenus E.3.10
J Contact View read-only Customer Support contact information screen E.3.11
K Remote Mode Open the Remote Access Mode setting E.3.1.1
See the listed appendix section for further information. Once you have confirmed that the
Telnet CLI’s Remote Access Mode is set to [Ethernet], press a hot key to access a configuration
submenu.