Comtech EF Data CDM-625 - Manual (Page 423)

CDM-625 Advanced Satellite Modem Revision 15
IP Packet Processor Option MN-CDM625
18–11
Step Task
2 The illustration at right identifies the upgrade locations
within the chassis for:
• Installation of the fan into the chassis;
• Plug-in of both the fan power cable and IP Packet
Processor Card into the modem’s framing board;
• Assembly of the IP Packet Processor Card onto the
chassis-mounted card bosses.
3 Unplug the front panel ribbon cable from its connector on
the modem’s framing board, and then move the cable out of
the way of the upgrade location.