Comtech EF Data CDM-625 - Manual (Page 67)

CDM-625 Advanced Satellite Modem Revision 15
Installation MN-CDM625
2–3
o Air temperature inside the rack enclosure should never exceed 50°C (122°F).
For information about custom rack enclosures, contact Comtech EF Data Product
Support.
• The CDM-625 CANNOT have rack slides mounted to the sides of the chassis.
Cooling fans and exhaust vents are provided here – air flow must not be
impeded. Comtech EF Data recommends that an alternate method of support is
provided within the rack, such as standard rack shelves or the optional Rear-
Mounting Support Bracket Kit. If there is any doubt, contact Comtech EF Data
Product Support.
Feature Description
1 Custom Rack Enclosure
2 CDM-625 Advanced Satellite Modem
3 Standard Rack Shelving
4
Rack Enclosure Threaded Front
Mounting Rail (typical)
5 Unit Front Panel
6 User-supplied Screws
Figure 2-2. Install the Unit Into a Rack Enclosure