Comtech EF Data CDM-625 - Manual (Page 503)

CDM-625 Advanced Satellite Modem Revision 15
Appendix D MN-CDM625
D–39
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to
Query
Demo Time
Remaining
N/A 6 bytes Query only.
Demo time remaining in the form ddhhmm,
dd = days (00 to 30)
hh = hours (00 to 23)
mm = minutes (00 to 59)
Example: DMT=032312 (3 days 23 hours 12 minutes)
N/A DMT? DMT=ddhhmm
(see Description of
Arguments)
Demo Mode DMM= 1 byte, value
of 0 thru 2
Command or Query.
Demo Mode Enable/Disable in the form x, where:
0 = Disabled
1 = Enabled
2 = Expired
DMM=
DMM?
DMM*
DMM#
DMM? DMM=x
(see Description of
Arguments)
Medium-
Earth Orbit
MEO= 1 byte Command or Query.
Medium Earth Orbit Enable/Disable in the form x, where:
0 = Disabled
1 = Enabled
MEO= MEO? MEO=x
(see Description
of Arguments)
Antenna
Handover
AHO= 1 byte Command or Query.
Antenna Handover Enable/Disable in the form x, where:
0 = Disabled
1 = Enabled
AHO= AHO? AHO=x
(see Description of
Arguments)
Antenna
Handover
Mode
AHM= 1 byte Command or Query.
Antenna Handover Mode in the form x, where:
0 = Manual
1 = Auto
AHM= AHM? AHM=x
(see Description of
Arguments)
Antenna
Handover
Differential
Path Delay
AHD= 3 bytes Command or Query.
Differential Path Delayin the form +xx (-13 to +13)
Example: AHD=+12 (Lead 12)
AHD=-03 (Lag 3)
AHD= AHD? AHD=xx
(see Description of
Arguments)
Time Protocol
Enable
TPE= 1 byte Command or Query.
Used to disable or enable the Time Protocol, where:
0 = Time Protocol disabled
1 = Time Protocol enabled
Example: TPE=1 (Time protocol enabled)
TPE=
TPE?
TPE? TPE=x
(see Description of
Arguments)