Comtech EF Data CDM-625 - Manual (Page 213)

CDM-625 Advanced Satellite Modem Revision 15
Ethernet-based Remote Product Management MN-CDM625
6–21
6.5.4.2.4 Admin | Reboot
Use this page to perform a soft reboot of the CDM-625 using the current, active firmware Image
as selected on the ‘Admin | Firmware | Base Modem’ page (Sect. 6.5.4.2.3.1) and/or the
‘Admin | Firmware | Packet Processor’ page (Sect. 6.5.4.2.3.2).
Figure 6-10. Status | Firmware Info | Reboot page
Click [Reboot Now] to perform the soft reboot of the CDM-625. The page updates to indicate
the reboot in progress as follows:
Depending on the number of installed hardware and firmware options, it may take up to one
minute for soft reboot to execute. Once the CDM-625 “splash” screen appears on the front
panel VFD, you must log in to begin a new Web Server Interface session. Do these steps:
1. Click [OK] on the ‘Rebooting’ page to complete the reboot process.
2. Upon reboot, you will need to refresh your browser window. Once the Login window
appears, type in your User name and Password.
3. Click [OK] in the Login window; the browser window will refresh to show the Web Server
Interface “splash” (Home) page.
4. Select any navigation tab to resume your session.