4 adaptive coding and modulation (acm), 5 fast options – Comtech EF Data CDM-625 User Manual
Page 415

CDM-625 Advanced Satellite Modem
Revision 15
IP Packet Processor Option
MN-CDM625
18–3
Sub-Mux capability can be used with the IP Packet Processor to multiplex a primary serial
synchronous or G.703 traffic stream with IP.
18.2.4 Adaptive Coding and Modulation (ACM)
Chapter 17. ADAPTIVE CODING
AND
MODULATION (ACM)
Comtech EF Data’s VersaFEC® Adaptive Coding and Modulation (ACM) feature, a patents-
pending technology wholly owned and developed by Comtech EF Data and CEFD sister division
Comtech AHA Corp., can be used with the IP Packet Processor to maximize throughput.
ACM converts available link margin into additional throughput, thereby maximizing throughput
under all conditions, including rain fade, inclined orbit satellite operation, antenna mispointing,
interference and other impairments.
18.2.5 FAST Options
• Sect. 5.2.8 SELECT: FAST Menus (Chapter 5. FRONT PANEL OPERATION)
• Appendix C. FAST ACTIVATION PROCEDURE
If there is a need to upgrade the CDM-625 IP Packet Processor’s functionality, Comtech EF Data
provides Fully Accessible System Topology (FAST), a technology that permits the purchase and
installation of options through special authorization codes. These unique Fast Access Codes may
be purchased from Comtech EF Data during normal business hours, and then loaded into the
unit using the front panel keypad.
Contact Comtech EF Data to acquire the following available FAST options:
• Header Compression:
o Up to 5 Mbps (CCM) / 1200 ksps (ACM)
o Up to 10 Mbps (CCM) / 4100 ksps (ACM)
o Up to 15 Mbps (CCM) / 4100 ksps (ACM)
o Up to 20 Mbps (CCM) / 4100 ksps (ACM)
o Up to 25 Mbps (CCM) / 4100 ksps (ACM)
• Payload Compression:
o Up to 5 Mbps (CCM) / 1200 ksps (ACM)
o Up to 10 Mbps (CCM) / 4100 ksps (ACM)
o Up to 15 Mbps (CCM) / 4100 ksps (ACM)
o Up to 20 Mbps (CCM) / 4100 ksps (ACM)
o Up to 25 Mbps (CCM) / 4100 ksps (ACM)
• Quality of Service
• AES Encryption