Comtech EF Data CDM-625 - Manual (Page 193)

6–1
Chapter 6. ETHERNET-BASED
REMOTE PRODUCT
MANAGEMENT
6.1 Overview
A user-supplied, Windows-based PC is used for Ethernet-based Remote Product Management of
the CDM-625 Advanced Satellite Modem. The User PC facilitates this access through three
separately-operated protocols:
• Simple Network Management Protocol (SNMP) – This requires a user-supplied Network
Management System (NMS) and a user-supplied Management Information Base (MIB) File
Browser.
• Telnet Interface – This requires use of a user-supplied terminal emulation program such as
HyperTerminal (for use with the remote control protocol) or PuTTY (for use with the Telnet
Command Line Interface), installed on the User PC.
• CDM-625 Web Server (HTTP) Interface – This requires a compatible user-supplied web
browser such as Internet Explorer, installed on the User PC.
6.2 Ethernet Management Interface Connectors
The CDM-625 base unit is equipped with four RJ-45 10/100 BaseT Ethernet connectors, subject
to the following conditions:
• When Dedicated Management is disabled, you may use any port for Ethernet-based remote
monitor and control (M&C) purposes.
• When Dedicated Management is enabled, you may use only that specific port for Ethernet-
based remote monitor and control (M&C) purposes.