Comtech EF Data CDM-625 - Manual (Page 244)

CDM-625 Advanced Satellite Modem Revision 15
Ethernet-based Remote Product Management MN-CDM625
6–52
Clocks
Use the drop-down lists provided in this section to configure Tx / Rx Clock Sources, Rx Buffer
Size, External Clock, External Frequency Reference, and G.703 Clock Extended Mode /
Interface.
Click [Submit Clocks] to save these settings.
Circuit and Carrier ID
It is IMPORTANT to understand that Carrier ID and Circuit ID, while named similarly,
are two distinct features of the CDM-625. Read your documentation carefully.
With Carrier ID enabled, the first 24 characters of the 40-character Circuit ID are
intended for and sent as the MetaCarrier Custom Message. While you must limit
your MetaCarrier Custom Message to 24 characters or less, the full 40 characters of
the Circuit ID will display on the front panel screen saver (see Sect. 5.1.3.1 Screen
Saver).
Chapter 19. CARRIER ID (MetaCarrier®)
• Circuit ID – Enter a Circuit ID string of
up to 40 characters, or a MetaCarrier
Custom Message of 24 characters or
less.
You may use the following characters to compose either string:
[Space] ( ) * + - , . / 0-9 and A-Z.
The Circuit ID / MetaCarrier Custom Message, as created here, also appears in the title bar
of compatible web browsers for easy unit identification.
• Carrier ID – Use the drop-down list to
set Carrier ID operation as Disabled or
Enabled.
Click [Submit] to save these settings.
Date and Time
• Enter a date using DD/MM/YY format
(where DD = day [01 to 31], MM = month [01 to 12], and YY = year [00 to 99]).
• Enter a time using HH:MM:SS format
(where HH = hour [00 to 23], MM = minutes [00 to 59], and SS = seconds [00 to 59]).
Click [Enter Date/Time] once you set the desired date and time.