Comtech EF Data CDM-625 - Manual (Page 221)

CDM-625 Advanced Satellite Modem Revision 15
Ethernet-based Remote Product Management MN-CDM625
6–29
• VLAN Table – This read-only table provides you with the status for VLAN entry on a per-ID
(0001-4095) and per-Port (1-4) basis, where U=Untagged, T=Tagged, and F=Filtered.
6.5.4.3.2.2 Configuration | LAN | ARP
This nested page is accessible only to Administrators when the optional IP Packet
Processor card is installed and enabled. See Sect. 6.5.3.1 for complete details
about using conditional access pages.
ARP (Address Resolution Protocol) is a technique by which the Web Server Interface in Router
Mode on a given network answers the ARP queries for a network address that is not on this
network, but is reachable via the IP Packet Processor Interface.
Use this page to configure the modem’s ARP parameters.
Figure 6-15. Configuration | LAN | ARP page
ARP Table (Edit)
This section displays all current Static and Dynamic ARP entries, and allows you to directly edit
the current Static ARP entries, when more than one ARP entry exists. Note the following:
Column Description
Index This is the internal table index that is automatically assigned and cannot be edited.
IP IP Address, in the format XXX.XXX.XXX.XXX.
MAC MAC Address, in the format YY:YY:YY:YY:YY:YY.
Type Type is identifiable as Static or Dynamic (cannot be edited).
Click [Submit Changes] to save these settings.