Comtech EF Data CDM-625 - Manual (Page 528)

CDM-625 Advanced Satellite Modem Revision 15
Appendix D MN-CDM625
D–64
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to
Query
Host Access
List
Enable/Disable
ACL= 1 byte, value
0 or 1
Command or Query.
IP Host Access List Enable/Disable in the form x, where:
0 = Host Access List is Disabled
1 = Host Access List is Enabled
ACL=
ACL?
ACL*
ACL#
ACL? ACL=x
(see Description of
Arguments)
Packet
Processor
Redundancy
PRD= 1 byte, value
0 or 1
Command or Query.
Valid only when Packet Processor is installed and Enabled.
Packet Processor Redundancy Enable/Disable, where:
0 = Disable Packet Processor Redundancy
1 = Enable Packet Processor Redundancy
PRD=
PRD?
PRD*
PRD#
PRD? PRD=x
(see Description of
Arguments)
Precision Time
Protocol
PTP= 1 byte, value
0 or 1
Command or Query.
Precision Time Protocol Feature Enable/Disable in the form x, where:
0 = PTP is Disabled
1 = PTP Enabled
PTP=
PTP?
PTP*
PTP#
PTP? PTP=x
(see Description of
Arguments)
Precision Time
Protocol
Grandmaster
PTM= 1 byte, value
0 or 1
Command or Query.
Precision Time Protocol Grandmaster selection in the form x, where:
0 = Grandmaster reachable over LAN.
1 = Grandmaster reachable over WAN.
PTM=
PTM?
PTM*
PTM#
PTM? PTM=x
(see Description of
Arguments)
Packet
Processor
Bootrom FW
Version
N/A None Query only.
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Bootrom firmware version.
N/A VS0? VS0=x
x is variable length of
text
Packet
Processor
Image1 FW
Version
N/A None Query only.
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Image 1 firmware version.
N/A VS1? VS1=x
x is variable length of
text
Packet
Processor
Image2 FW
Version
N/A None Query only.
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Image 2 firmware version.
N/A VS2? VS2=x
x is variable length of
text
Packet
Processor
Running FW
Image
N/A None Query only.
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Running firmware image.
N/A AFI? AFI=x
x is variable length of
text