Comtech EF Data CDM-625 - Manual (Page 649)

CDM-625 Advanced Satellite Modem Revision 15
Appendix F MN-CDM625
F–31
Once all events are compiled, the Stored-Events screen appears as shown here:
Stored Events: Clear-All: No (No,Yes)
#084 Info - PWR ON 10/12/10 12:52:08
On the top line – Use the ◄ ► arrow keys to select between log entries and the Clear-All option.
To clear the Stored -Events Log, use the ▲▼ arrow keys to select Clear-All, and then use the
▲▼ arrow keys to select Yes. Press ENTER when done.
On the bottom line – To view the Stored-Events Log: With the cursor on the entry number, use
the ▲▼ arrow keys to scroll through the entries. Up to 512 entries are stored.
Each entry provides the following information:
Item Comments
Entry Type
• Info (Information)
• Fault
• Clear (fault cleared)
Entry Number 001 through 511
Date European Day-Month-Year (DD-MM-YY) format
Time Hour:Minute:Second (HH:MM:SS) format
Description of the
fault/information
Example: Info – PWR ON
F.3.3.3.3.4.3.1.4 ODU: FSK-control  BUC  Advanced-FSK  LPOD
(2LPODs Online/Offline LPOD) Statistics
Statistics:
Config Stored-Statistics ()
Use the ▲▼ arrow keys to select Config or Stored-Statistics, and then press ENTER.
ODU: FSK-control  BUC  Advanced-FSK  LPOD (2LPODs
Online/Offline LPOD) Statistics Config
Stats: Logging=Enabled Interval=10 min
Averaging=Disabled Clear-All=No (◄ ►)
Use the ▲▼ arrow keys to select Logging, Interval, Averaging, or Clear-All, and then use the
▲▼ arrow keys to set that setting: