Comtech EF Data CDM-625 - Manual (Page 463)

CDM-625 Advanced Satellite Modem Revision 15
Appendix C MN-CDM625
C–5
Step Task
3 Contact a Comtech EF Data sales representative during normal business hours to order features:
• Provide the unit Serial Number to the representative.
• Identify and purchase the desired FAST option(s).
• Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and the FAST option
activation instructions.
When a FAST access code is obtained from Comtech EF Data, it will be for
a specific option register. The FAST options are linked to three option
registers:
• Register 1 is for Data Rate options.
• Register 2 is for L-Band, Modulation type and Framing options.
• Register 3 is the Fractional CnC option.
4 Enter the FAST access code(s):
a) In the ‘Admin | FAST’ page FAST code section, carefully enter each register-specific 20-
character FAST access code in sequence .
b) Click [Submit FAST code].
With Firmware Ver. 2.1.0 and later, all three FAST access codes must be
entered in sequence
The message “Configured Successfully” appears at the top of the FAST code section if the FAST
upgrade is accepted; the modem then resets to its newly-incorporated default configuration.
in order for the purchased option upgrades to be
properly activated.
However, if an invalid code is entered, either of the following messages may appear instead:
Repeat the FAST access code entry procedure. Should the code entry error persist, contact Comtech
EF Data Product Support for further assistance.